The MasterScanner XPL series of MasterScanners includes the larger and more versatile models of the MasterScanner. All MasterScanners will measure down to 1mm OD and 2.5mm ID (0.04in OD and 0.1in ID). The XPL series of MasterScanner has maximum size ranges of 200mm, 300mm, 400mm, 500mm and 600mm (about 8, 12, 16, 20 and 24 inches), and scan lengths of either 100mm, 200mm, or 275mm (about 4in, 8in or 11in)
The XPL series of MasterScanners were designed around the API thread gaging industry, with the largest model able to do the full range of the API spec with ease, even on arbors. The most difficult part of this process is lifting such heavy gaging!
Click on each model to read the full capabilities of each MasterScanner XPL:
MasterScanner XPL-200-C
MasterScanner XPL-300-C
MasterScanner XPL-400
MasterScanner XPL-500
MasterScanner XPL-600
MasterScanner XPL-200-C
The MasterScanner XPL-200-C is part of the C model series. The C models are smaller than their XPL counterparts, and less expensive due to the lack of an air table for positioning heavier parts. The XPL-200-C comes in 3 models; the XPL-200-100-C, the XPL-200-200-C and the XPL-200-275-C, all having different scan lengths.
- Minimum OD measurement: 1mm (0.04in)
- Maximum OD measurement: about 200mm (7.9in)
- Minimum ID measurement: 2.5mm (0.1in)
- Maximum ID measurement: 200mm (7.9in)
- Scan length XPL-200-100-C: 100mm (4in)
- Scan length XPL-200-200-C: 200mm (8in)
- Scan length XPL-200-275-C: 275mm (11in)
Capability upgrades:
- Trapezoidal option
- API Buttress option
- Temperature Compensation option
- Vibration Dampening System option
To view this MasterScanner in action click here!
MasterScanner XPL-300-C
The MasterScanner XPL-300-C is part of the C model series. The C models are smaller than their XPL counterparts, and less expensive due to the lack of an air table for positioning heavier parts. The XPL-300-C is the same as the XPL-200-C with a larger measurement capability. This unit will go up to 300mm (11.8in) in diameter.
- Minimum OD measurement: 1mm (0.04in)
- Maximum OD measurement: about 300mm (11.8in)
- Minimum ID measurement: 2.5mm (0.1in)
- Maximum ID measurement: 300mm (11.8in)
- Scan length XPL-300-100-C: 100mm (4in)
- Scan length XPL-300-200-C: 200mm (8in)
- Scan length XPL-300-275-C: 275mm (11in)
Capability upgrades:
- Trapezoidal option
- API Buttress option
- Temperature Compensation option
- Vibration Dampening System option
This MasterScanner will be available for a demo at MasterScanner USA just outside Cleveland, OH!
MasterScanner XPL-400
The MasterScanner XPL-400 is the smallest of the standard XPL series. The XPL series of MasterScanners have an air table for positioning heavier parts due to the diameter capabilities. The XPL-400 is the almost same as the XPL-300-C in capabilities, except the XPL-400 will go up to 400mm (15.7in) in diameter and only has one scan length option, 250mm (9.8in).
- Minimum OD measurement: 1mm (0.04in)
- Maximum OD measurement: about 400mm (15.7in)
- Minimum ID measurement: 2.5mm (0.1in)
- Maximum ID measurement: 400mm (15.7in)
- Scan length XPL-400: 250mm (9.8in)
Capability upgrades:
- Trapezoidal option
- API Buttress option
- Temperature Compensation option
- Vibration Dampening System option
- Arbors Attachment
MasterScanner XPL-500
The MasterScanner XPL-500 is the second largest MasterScanner available. The XPL series of MasterScanners have an air table for positioning heavier parts due to the diameter capabilities. The XPL-500 is the almost same as the XPL-400 in capabilities, except the XPL-500 will go up to 500mm (19.7in) in diameter.
- Minimum OD measurement: 1mm (0.04in)
- Maximum OD measurement: about 500mm (19.7in)
- Minimum ID measurement: 2.5mm (0.1in)
- Maximum ID measurement: 500mm (19.7in)
- Scan length XPL-500: 250mm (9.8in)
Capability upgrades:
- Trapezoidal option
- API Buttress option
- Temperature Compensation option
- Vibration Dampening System option
- Arbors Attachment
MasterScanner XPL-600
The MasterScanner XPL-600 is the largest MasterScanner available. The XPL series of MasterScanners have an air table for positioning heavier parts due to the diameter capabilities. The XPL-600 is the almost same as the XPL-500 in capabilities, except the XPL-600 will go up to 600mm (23.6in) in diameter. This MasterScanner will calibrate the largest standard API buttress thread gage with ease, even on arbors.
- Minimum OD measurement: 1mm (0.04in)
- Maximum OD measurement: about 600mm (23.6in)
- Minimum ID measurement: 2.5mm (0.1in)
- Maximum ID measurement: 600mm (23.6in)
- Scan length XPL-600: 250mm (9.8in)
Capability upgrades:
- Trapezoidal option
- API Buttress option
- Temperature Compensation option
- Vibration Dampening System option
- Arbors Attachment